|
|
|
|
 |
|
|
The DSP-599zx is part of the latest generation of Timewave DSP filters
incorporating the newest high speed CPU. The extra power gives the user
unparalleled features and field upgradeability for the future. The new LCD
display, push buttons, and Visible Memory let you see the exact settings of the
filter. The optical encoders give the operator continuous tuning of the filters. |
|||
Noise Reduction |
The noise reduction functions of the DSP-599xz operate by examining a characteristic of signals and noise called correlation and dynamically filtering out the undesired noise. The degree of correlation is relative. Random noise such as white noise or static is uncorrelated. Speech is moderately correlated. Heterodynes and pure tones are highly correlated. The DSP-599zx measures correlation and automatically filters out noise that is outside its correlation thresholds. The amount of noise reduction varies according to the correlation characteristics of the noise. |
||
Data and Bandpass Filters |
Narrow band signals like CW and RTTY require bandpass filters with steep
skirts and linear phase response. Linear phase response maximizes the usable
signaling rate for a given bandwidth and minimizes ringing often heard on other
types of extremely sharp filters. The filter skirts are so steep that signals
literally fall off the edge of the passband as you tune through them. Bandwidths
range from 10 Hz to 600 Hz, and center frequencies from 200 Hz to 2150 Hz.
Narrow filters are useful for trying to dig extremely weak signals out of the
noise and QRM. The wider filters allow for easy tuning and listening to multiple
CW signals simultaneously. |
||
| The Data filters support RTTY, AMTOR, PacTOR, G-TOR, HF Packet, SSTV, WeFAX, SITOR and Clover. In addition to regular filtering, the DSP-599zx offers two other RTTY functions. The RTTY Remodulator mode detects and regenerates the mark and space tones going to your Multi-Mode Controller (KAM, PK-232, MFJ-1278, Etc.), giving it the benefits of a DSP front-end. The RTTY Modem mode provides a complete RTTY Terminal Unit when used in conjunction with a PC and appropriate software. | |||
Test Instruments |
An added benefit of the powerful DSP processor and LCD display in the DSP-599zx is a Test Instrument Mode. This mode is designed to provide the audio test instruments necessary for normal maintenance and setup of audio circuits in radio equipment installations. A low distortion Sine wave Generator and an Audio Millivoltmeter cover the frequency range from 20 Hz to 10 kHZ. The millivoltmeter measures true rms, peak, dBV, and dBm as low as 1 mv. The sine wave generator is calibrated in the same units. The sine wave generator and audio millivoltmeter operate simultaneously for gain and frequency response measurements. (Version 4 firmware only!) Another feature enhanced by the millivoltmeter is the CTCSS or "PL" tone encoder/decoder with the tone frequency autodetect. Millivoltmeter measurements allow relative frequency deviation measurements of a received signal's CTCSS tone. A CTCSS squelch output can switch a tape recorder or other device. A Two-Tone audio generator is provided for SSB linearity testing. |
||
Installation |
The DSP-599zx is compatible with all amateur radio transceivers and receivers. Simply connect the DSP-599zx between the radio and an external speaker or headphones. Connect 12-16 VDC to the DSP-599zx and turn it on! |
||
|
ALL Timewave DSP Filter models
SIMULTANEOUSLY Reduce Noise, Kill Heterodynes and QRM!
|
Audio Input A & B |
Audio Output A & B |
|||
| Impedance | 20K ohms or 25 Ohms, jumper selectable | Output power | 1.0 watts
into 8 ohms at 13.8 VDC, both output channels A&B operating. 1.5 watts into 4 ohms at 13.8 VDC, both output channels A&B operating. | |
| Signal range for full output | 10 mV to 1 volt, front panel programmable | |||
| Line output level | 0 dB, referenced to input level. Not controlled by gain control | |||
|
|
||||
Automatic Gain Control (AGC) |
||||
| Voice | 36 dB | |||
| CW & Data Modes | 18 dB | |||
|
|
||||
Noise Reduction Filters |
||||
| Function | Frequency range | Attenuation | Type | Delay |
| Random Noise Reduction | Entire freq. range of selected bandpass filter | Up to 20 dB, varies with noise characteristics. | Adaptive | 5 ms max |
| Variable Noise Reduction | Noise reduction aggressiveness front panel adjustable | |||
| Heterodyne Eliminator (Multiple Automatic Notch) | Entire freq. range of selected bandpass filter | Up to 50 dB, varies with noise characteristics | Adaptive | 5 ms max |
| Heterodyne Eliminator (Manual Notch) | Entire freq. range of selected bandpass filter | Up to 50 dB, varies with noise characteristics | Adaptive Manual | |
|
|
||||
Voice Filters |
||||
| Function | Frequency range | Attenuation | Type | Delay |
| Highpass | Corner freq. = 100 to 1000 Hz., 10 Hz. steps. | 60 dB at 180 Hz. outside the passband | FIR Linear phase | 21 ms max |
| Lowpass | Corner freq. = 1000 to 5000 Hz. 10 Hz. steps | 60 dB at 180 Hz. outside the passband | FIR Linear phase | |
|
|
||||
CW Filters |
||||
| Function | Frequency range | Attenuation | Type | Delay |
| CW Filters | Bandwidth = 5 Hz to 600 Hz, 5 Hz steps. | 55 dB at 60 Hz. outside the passband | FIR Linear phase | BW less than 20 Hz = 58 ms max. BW greater than 20 Hz = 34 ms max |
| Center freq. = 200 to 2150 Hz., 5 Hz. steps. | ||||
| CW Marker Tone | Sine wave at center freq. of selected CW filter. | |||
|
|
||||
Data Filters |
||||
| Function | Frequency range | Attenuation | Type | Delay |
| RTTY, AMTOR, PacTOR, G-TOR, & HF-Packet | Bandwidth = 60 Hz. to 600 Hz. Center freq. = 2210 Hz. plus option of 1700(default), 1360, 1300, 1530 or 2125 Hz. |
40 dB at 60 H. outside the passband | FIR Linear phase | 30 ms max |
| SSTV | 1100-1300 Hz. & 1500-2300 Hz. | 50 dB at 75 Hz. outside the passband | Composite FIR Linear phase | 21 ms max |
| WeFAX | 1500-2300 Hz. | 55 dB at 75 Hz. outside the passband | FIR Linear phase | 21 ms max |
| CLOVER | 2000-2500 Hz. | 55 dB at 75 Hz. outside the passband | FIR Linear phase | 21 ms max |
| FSK Marker Tones | 1) Sync-Nul character (Diddle) of selected data filter at
selected baud rate 2) RY string (RTTY only) | |||
|
|
||||
RTTY Modem |
||||
| Shifts | 170, 200, 425, 850 Hz | |||
| Data Rates | 45, 50, 57, 75 Baud | |||
| Input | Audio from receiver | |||
| Output | Open collector FSK and variable level AFSK | |||
| Transmit Data Polarity | Normal or Reverse | |||
| I/O | Receive data, Transmit data, PTT (RS-232 compatible) | |||
|
|
||||
Signal Processing |
||||
| A-D/D-A Converter | 16 bit linear, sigma-delta conversion, dual channel | |||
| Signal Processor | 16 bit, 27ns Analog Devices ADSP-2181 with 80 KB of memory | |||
|
|
||||
Test Instrument |
||||
| Audio Generator | Single Sine wave adjustable 20 Hz to 10 kHZ Two-tone fixed 700 Hz and 1900 Hz. |
|||
| Audio Millivoltmeter | True RMS from 1mV to 2000 mV, 20 Hz-10 kHz | |||
| CTCSS Encoder/Decoder | Decodes and displays CTCSS "PL" tones from 67.0 Hz to 254.1 Hz (Version 5 firmware only) | |||
| CTCSS Squelch | Open collector output pulls low when selected CTCSS tone is present. (Version 5 firmware only) | |||
|
|
||||
Memory |
||||
| Six Memories | All configuration setups can be stored and recalled (except volume control setting) | |||
|
|
||||
Display |
||||
| 2X16 alphanumeric characters, dot matrix, yellow-green backlit LCD | ||||
|
|
||||
Dimensions |
||||
| Size | 7.6 in. wide x 8.5 in. deep x 1.9 in. high (193 mm wide x 216 mm deep x 48 mm high) | |||
| Weight | 2.53 lb. (1.15 Kg.) | |||
|
|
||||
Power |
||||
| 12-16 VDC @ 1A, Fuse 1.6A, 5 mm x 20 mm | ||||
| Note: | RTTY, AMTOR, PacTOR, G-TOR, and HF Packet data filter bandwidths are specified at -3 dB points to comply with traditional data filter specification methods. All other filter bandwidths are specified to comply with conventional DSP FIR filter parametric descriptions. | |||
|
|
||||
|
| © 2007-2022 Timewave Technology, Inc. All Rights Reserved. |  |