DSP-D300 Support

Specifications

Data Sheet

Manual

Updates/Downloads

Contacts

NOAA

Manual

Manual v2.3	August 1, 2008	DSP-D300.pdf
Manual v3.6	November 2, 2009	DSP-D300.pdf
Getting Started	April 7, 2006	Quick Start.pdf

To read PDF files, you need Acrobat Reader. Download it here.

Updates (Version 3.6.5 and newer)

Please read the Upgrade Manual before attempting any of these updates.
Attempting to load the version 3.0 or higher CPU code onto a D300 with a serial number less than 25100 will result in unusable hardware. It may be reloaded with version 2.2. DO NOT attempt to load Ethernet firmware in a pre-25100 unit (unless it has a -2 in the serial number) as that will require a factory repair.

Manual v3.6	November 2, 2009	DSP-D300.pdf
Setup v3.6.5	October 23, 2009 July 5, 2011	DSP-D300_20091023.iso (Install Disk) Setupv366_20110705.msi (Setup MSI) Note: When asked "Are you sure" for the driver copy, say "Yes" or "Ok" or "Install this driver anyway", depending on Windows version.
CPU v3.6.5 HID Driverless Version	October 23, 2009	CPUv366_20091023.hex CPUV366_20091023.BIN CDC_ACM.inf BIN file is for field updates. HEX file is for programmer unit updates. (The little white programmer.) Note: The HEX file needs to be loaded at least once on pre-version 3 units for field updates to work. IF YOU UPDATE THIS FILE FROM VERSION 2.x, YOU ALSO NEED TO UPDATE THE COM! Note: Requires COM v3, DSP v3.5 and Ethernet v3.5.
COM v3	September 13, 2009	COM_20090913.hex
Control300 v3.6.5	November 8, 2009	Control300v365_20091108.zip
DSP v3.7	September 29, 2010	D300_DSP_20100929.ldr Fix for floating noise floor
Ethernet v4.0.2	March 22, 2011	imagev402_20110322.bin Fix for router connection timeouts. imagev355_20090915.bin Note: Requires upgrade to version 3.x before upgrading to Version 4.
CommReadTW	October 23, 2009	CommReadTW_20091023.zip

Updates (Version 2.3)

Please read the Upgrade Manual before attempting any of these updates.
Attempting to load the Type 2 firmware onto a Type 1 Ethernet module will result in unusable hardware and will need factory repairs.

Manual v2.3	August 1, 2008	DSP-D300.pdf
Ethernet v2.3 (Type 1 Ethernet)	October 3, 2007	imagev230_20071003.bin Now includes support for cable removal and reinsertion.
Ethernet v2.3.5 (Type 2 Ethernet)	October 3, 2007	imagev235_20071003.bin Now includes support for cable removal and reinsertion.
Distribution Disk Image	August 22, 2008	20080822_Release23.iso (18 MB)

Updates (Version 2.2)

Please read the Upgrade Manual before attempting any of these updates.

Upgrade Manual	May 4, 2007	Upgrade.pdf Note: This is now included in the Manual (above). It is recommended that the Manual be used because it is more inclusive.
Setup	May 4, 2007	D300_setup_v220_20070504.exe (14 MB)
Distribution Disk Image	May 4, 2007	20070504_Release22.iso (42 MB)
Control300	June 5, 2007	Control300v22_20070605.zip Latest Fixes: Ethernet GUI save To install, unzip the archive into your "Program Files/Timewave/DSP-D300" folder over the existing files.
CPU	January 2, 2008	CPUv22_20080103.hex Latest Fixes: Support more Memory Types
COM	January 2, 2008	COM_20080103.hex Latest Fixes: Fix baud rate settings
DSP	March 15, 2007	D300_DSP_20070319.ldr (Serial #'s below 25100) D300_DSP2_20070319.ldr (Serial #'s above 25100) Latest Fixes: Added turn off for Error Correction.
Driver	January 18, 2006	Driverv2_20060118.zip

Updates (Version 2.1)

Distribution Disk Image

February 13, 2007

20070213_Release21.iso (45 MB)

Updates (Version 2)

Distribution Disk Image

April 5, 2006

20060405_Release20.iso (45 MB)

Updates (Version 1)

Monitor	July 6, 2005	Data/IFLOWSMonitor_20050706A.zip
LogCompareTW	July 6, 2005	Data/LogCompareTW_20050706A.zip
Distribution Disk Image	September 20, 2005	20050920_Release12.iso

Other

Timewave Technology assumes no responsibility for software manufactured by other companies.

HW VSP
Free Virtual Serial Port to connect any TCP/IP Terminal server to your Windows as virtual serial port (COM 7 for example). Produced by www.HW-group.com.